John Deere 6105M

6105M

6105M

 

  • Low-profile design perfect for orchards, nurseries, vineyards and other hard-to-reach areas
  • Folding ROPS and rear lights
  • PowrQuadTM transmission with left hand shuttle-shift control
  • Horizontal exhaust
Manufacturer John Deere
Model 6105M
Official Test  
Nebraska Test number Nebraska OECD Tractor Test 2076 - Summary 892
Engine  
Manufacturer John Deere 4.5L PowerTech PVX
Engine family ---
Aspiration Variable Geometry Turbocharger with Intercooler and Cooled Exhaust Gas
Cylinders/Displacement, cu. in. (L) 4.5 L
  4/276 cu in.
Cylinder Liners Wet
Fuel tank capacity, US Gal. (L) (Open; Cab) ---
Standard 58 (220)
Optional N/A
Underhood muffler Yes
Performance  
Advertised PTO hp (kW) @ Rated rpm 64 @ 2100 per SAE kW
  86 @ 2100 per SAE PTO hp
Official PTO hp (kW) @ Rated rpm 65.49 @ 2101 per SAE kW
  87.83 @ 2101 per SAE PTO hp
@ Standard PTO @ Eng rpm 96.86 (72.23) @ 1962 per SAE rpm
Maximum @ Eng rpm 99.07 (73.87) @ 1852 per SAE rpm
Advertised Engine hp (kW) @ Rated speed 78 @ 2100 per ISO 97/68/EC kW
  105 @ 2100 per ISO 97/68/EC hp
Max Unballast Drwbr hp (kW) @ Eng rpm 67.30 @ 1850 per SAE kW
  90.25 @ 1850 per SAE hp
Maximum Torque (PTO) @ rpm, lb-ft (Nm) 452 @ 1401 Nm
  333 @ 1401 lb-ft
Max Torque Rise (80% rtd spd) @ Eng rpm 38.0% @ 1681 rpm
Maximum Torque Rise % (PTO) @ Eng rpm 51.7% @ 1401 rpm
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm 21.37 hp hr/gal. & 15.56 hp hr/gal. @ 2101
  5.65 & 15.56 @ 2101 U.S. gal./hr
Standard PTO Speed @ Eng speed 21.93 hp hr/gal. & 3.29 hp hr/gal. @ 1962
  5.79 & 16.72 @ 1962 U.S. gal./hr
Maximum PTO Power @ Eng rpm 21.99 hp hr/gal. & 3.36 hp hr/gal. @ 1852
  5.81 & 17.05 @ 1852 U.S. gal./hr
Maximum Engine Power @ Eng rpm 21.50 hp hr/gal. & 2.85 hp hr/gal. @ 2100
  5.68 & 14.45 @ 2100 U.S. gal./hr
Max Unballasted Drawbar Power @ Eng rpm 22.10 hp hr/gal. & 3.05 hp hr/gal. @ 1850
  5.83 & 15.47 @ 1850 U.S. gal./hr
75% Load, Full Engine rpm (Unballasted) 18.85 hp hr/gal. & 2.56 hp hr/gal. @ 2194
  4.98 & 13.00 @ 2194 U.S. gal./hr
75% Load @ Reduced rpm (Unballasted) 16.80 hp hr/gal. & 2.88 hp hr/gal. @ 1601
  4.44 & 14.61 @ 1601 U.S. gal./hr
Transmission  
Std. Transmission; Forward/Reverse PowrQuad PLUS 40K; 24F/24R (OOS - SyncroPlus 30K; 12F/4R)
Opt. Transmission; Forward/Reverse PowrQuad PLUS 30K; 16F/16R -- AutoQuad PLUS 40K; 24F/24R (OOS - PowrQuad 30K; 16F/16R -- PowrQuad 40K; 24F/24R)
Reverser Base LH
On-the-Go Shifting (Yes/No/Partial) Yes
Clutch; Wet/Dry Wet
Creeper Yes
Power Take-Off (PTO)  
Standard Independent 540/1000 RPM, 1 3/8 in.
Optional Independent 540 RPM
PTO Speeds @ Engine rpm 540 @ 1967 or 1000 @ 1962
PTO Actuation Electrohydraulic
Hydraulics  
Type Pressure Compensated (PC) System with Load Sensing Function
Pump Rated Output, GPM (L/min.) ---
Standard 21.1 (80)
Optional 30 (114)
Rated Flow @ One SCV, GPM (L/min.) 83.8 L/min Std. 45 cc Pump; 115.3 L/min Opt. 60 cc Pump L/min
  22.1 U.S. gpm Std. 45 cc Pump; 30.5 U.S. gpm Opt. 60 cc Pump gpm
Max Output @ SCV Couplers, GPM (L/min.) 84.0 L/min Std. 45 cc Pump; 115.6 L/min Opt. 60 cc pump L/min
  22.2 U.S. gpm Std. 45 cc Pump; 30.5 U.S. gpm Opt. 60 cc pump gpm
Maximum Operating Pressure, psi (kPa) 20000 kPa
  2900 psi
Maximum Hydraulic Power, hp (kW) 25.9 Std. Pump and 33.8 Opt. Pump kW
  34.8 Std. Pump and 45.4 Opt. Pump hp
Hitch Draft Control Load Sense Type Electrohydraulic
Remote Control Valves Available Up to 4 rear mechanical or 3 with power beyond, 3 mid-mount mechanical
Hitch Category (SAE Designation) Category 3N/2
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. ---
OECD ---
Standard 2131.21 - 2 x 70 mm lift cylinders per NE Test kg
  4689 - 2 x 70 mm lift cylinders per NE Test lb
Optional 2794.02 - 2 x 80 mm lift cylinders per NE Test kg
  6152 - 2 x 80 mm lift cylinders per NE Test lb
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE) ---
Standard Refer to Operator's Manual
Optional Refer to Operator's Manual
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE) ---
Standard Refer to Operator's Manual
Optional Refer to Operator's Manual
Sensing type Electronic Lower Link
Joystick SCV control Mechanical
Final Drive  
Type Inboard planetary three pinion
Differential controls Electrohydraulic
Availability ---
Front Yes
Front & Rear Yes
Engage On-the-Go Rear Differential Lock Yes
Axle Type Flange/Rack and pinion
Brakes, Type and Control Hydraulic actuated oil cooled
Operator Station  
Rollover Protective Structure, OOS Yes
Rigid - Foldable - Telescopic N/A
Platform - Flat/Straddle Yes
Gearshift Location - Console/Floor Transmission specific
Cab ---
Doors 2
Platform - Flat/Straddle N/A
dB(A) Rating 66.6 dBA
Seat Suspension System Mechanical and Air Suspended
2WD Dimensions  
Wheelbase, in. (mm) 2580 mm
  101.6 in.
Front Tread Range, in. (mm) TBD
Rear Tread Range, in. (mm) TBD
Minimum Rear Tread Setting, in. (mm) TBD
Front Axle Clearance, in. (mm) TBD
Turning Radius w/Brakes, ft (m) TBD
Turning Radius w/o Brakes, ft (m) TBD
Unballasted Operating Weight, lb (kg) TBD
Approx. Ship Wgt, lb (kg) Open; Cab TBD
MFWD Dimensions  
Wheelbase, in. (mm) 2580 mm
  101.6 in.
Front Tread Range, in. (mm) 2015 mm
  79.3 in.
Front Axle Clearance, in. (mm) 520 mm
  20.47 in.
Turning Radius w/Brakes, ft (m) Per tire size required, utilize Turn Radius Calculator Tool located in ASM
Turning Radius w/o Brakes, ft (m) Per Tire Size required, utilize Turn Radius Calculator Tool located in ASM
Limited Slip Differential 30-45 %
Unballasted Operating Weight, lb (kg) ---
Approx. Ship Wgt, lb (kg) Open; Cab 5008 kg
  11040 lb
4WD Dimensions  
Wheelbase, in. (mm) N/A
Wheel Tread, Min. to Max. in. (mm) N/A
Turning Radius w/o Brakes, ft (m) N/A
Nebraska Test Unballasted w/Duals, lb (kg) N/A
Unballasted Weight, lb (kg) N/A
Standard Tires  
2WD ---
Front 10.00-16 in. 10PR F2 Bias
Rear 460/85R34 in. 147A8 R1W Radial
MFWD ---
Front 380/85R24 in. 131A8 R1W Radial
Rear 460/85R34 in. 147 A8 R1W Radial
4WD ---
Track widths N/A
Miscellaneous  
Country of Manufacture Mannheim, Germany
Ballasting Restrictions, lb (kg) Refer to Operator's Manual
*Notes Updated - 03/28/2014

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Neuhaus & Co., LTD. is committed to our customers

Contact Us

HAVE A QUESTION?

Let us help you get moving.